Idiomas disponibles
Idiomas disponibles
ADJUSTMENTS PROCEDURE
The appliance's main functions do not require any
special adjustments by specialist staff except the
settings made during use by the user.
RECOMMENDATIONS FOR REPLACING PARTS
Before carrying out any replacement procedure, ac-
tivate all the safety devices provided and decide
whether staff at work and those in the vicinity
should be informed. In particular, turn off the gas
supply tap and prevent access to all devices which
might cause unexpected health and safety hazards
if turned on. If work parts have to be replaced, use
original spare parts only.
REPLACING THE FAN MOTOR
To carry out this opera-
tion, proceed as fol-
lows.
1 - Turn off the gas supply
tap.
2 - Open the oven door (A).
3 - Undo the screws (B) and
IT
remove the casing (C).
4 - Undo the screws (D).
GB
5 - Pull off and extract the
motor support (E) without
pulling the electric cable.
DE
6 - Disconnect the connector
(F).
FR
7 - Remove the fan (G).
8 - Undo the screws (H), re-
ES
move the motor (L) and replace it.
9 - Return the appliance to its initial configuration.
DECOMMISSIONING THE APPLIANCE
Important
This operation must be carried out by
skilled operatives in compliance with the le-
gal requirements with regard to safety at
work. Never dump non-biodegradable ma-
terials, lubricating oils and non-metallic
components (rubber, PVC, resins, etc.) in
English
ADJUSTMENTS
REPLACING PARTS
A
F
C B
- 18 -
The manufacturer declines all responsibly for injury
or damage to components due to the use of non
original parts, or extraordinary work on the appli-
ance which may modify the safety requirements
without the manufacturer's authorisation. When or-
dering components, follow the instructions provided
in the parts catalogue.
D
E
the environment. Dispose of them in ac-
cordance with the relevant legal require-
ments.
8
9
H
L
G
IDM-39604016500.tif
