Kohler K-200 Guía De Instalación Y Cuidado página 4

Tools and Materials
Before You Begin
WARNING: Risk of personal injury. These systems are
intended for use with potable water, and have not been
evaluated for other uses. The product is installed at the point
of use and must be installed as specified in the installation
instructions by a qualified professional.
NOTE: Do not install this product outdoors, or where it may be
exposed to direct sunlight.
NOTE: Choose an installation location where this product will be
protected from damaging impacts.
NOTE: Make sure the mounting location and fastening hardware
will support the system when installed and full of water.
Observe all local plumbing and building codes.
Shut off the water supply.
Inspect the plumbing and supplies for damage. Repair or replace
as needed.
Install the water filtration system to a cold water supply only. Do
not install the system to a hot water supply.
Do not install where water hammer conditions may occur. If
water hammer conditions exist you must install a water hammer
arrestor.
Where a backflow prevention device is installed on a water
system, you must install a device for controlling pressure due to
thermal expansion.
1270310-2-B
Plus:
• Adapter (Optional)
• Fastening hardware
Thread
Sealant Tape
4 Kohler Co.