HR Matic HR B120+ Manual De Instalación página 25

6- CONNECTION TERMINALS
TERMINAL
12,13
43,44
42,41
LEGEND
(NC) Input normally closed, to be short-circuited with 0V power output if not used
(NO) Input normally open, must be left open if not used
NOTE: the AUX1 input assumes the opening safety function (SA). If no opening safety
is used, close the input to ground (0V) with a jumper.
CODE
1,3 F - N Power supply 230Vac ± 10% (50-60Hz)
- Ground connection
LAMP
4,5 Flashing light output 230VAC
11 CH M2 motor close output (beaten door)
10 COM M2 motor common output (beaten door)
9 AP M2 motor open output (beaten door)
8 CH M1 motor close output (hinged door)
7 COM M1 motor common output (hinged door)
6 AP M1 motor open output (hinged door)
LC Courtesy light output 230Vac
21 ES Electric lock output 12Vac
22 0V Power reference output 0V
24 24V Power supply output +24Vdc
25 SCA Open gate light output 24Vdc
26 PP Step-by-step control input (NO)
27 STP Stop command input (NC)
30 APP Pedestrian opening command input (NO)
31 FOT1 External photocell 1 input (NC)
34 FOT2 Internal photocell 2 input (NC)
35 SC Sensitive edge (NC o 8K2)
36 0V Power reference output 0V
32 TMR External clock input (NO)
46 AUX1 Safety input on opening
47 0V Power reference output 0V
48 CK Photocells check power supply output +24Vdc
CH2 Second radio channel output
ANT Antenna connection
BLE Bluetooth module connector
FC-EN Limit switch module connector
RADIO Radio module
DESCRIPTION
6