Velleman DVM010 Manual Del Usuario página 11

20kΩ
200kΩ
20MΩ
200MΩ
Overload protection: 250 V DC or AC rms
9.5 DIODE AND CONTINUITY
range
10. Operation
10.1 DC + AC VOLTAGE MEASUREMENT
Do not measure circuits that may contain voltages > 600 VDC or
> 600 VAC
Use extreme caution when measuring voltages higher than 60 VDC
or 30 VAC rms.
Always place your fingers behind the protective edges of the test
probes while measuring!
Insert the red test lead into "VΩmA" jack and insert black test lead
1.
into "COM" jack.
2. Set the rotary switch to voltage range and touch the test lead probe
tips to the circuit under test, the red test lead connection will be
displayed.
Notes
•
Set the rotary switch to higher range if not known the current
range under test, and then lower down till the best accuracy.
V. 01 – 09/05/2023
DVM010
10Ω
100Ω
10KΩ
100KΩ
Do not conduct diode or continuity measurements on
description
display reads the
approximate forward
voltage of the diode
built-in buzzer sounds
if resistance < 50 Ω
±1.0%±5
±1.0%±5
±1.2%±8
±5.0%±10
live circuits
11 ©Velleman Group nv