Hama 00124020 Instrucciones De Uso página 2

| o
Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
* This symbol is used to indicate safety
instructions or to draw your attention to
specific hazards and risks.
* This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
+ USB 3.0 Card Reader
* These operating instructions
3. Safety Instructions
+ The product is intended for private, non-
commercial use only.
Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
Do not use the product in the immediate vicinity
of heaters or other heat sources or in direct
sunlight.
Do not drop the product and do not expose it to
any major shocks.
Do not attempt to service or repair the product
yourself. Leave any and all service work to
qualified experts.
Do not open the device or continue to operate it
if it becomes damaged.
Dispose of packaging material immediately
according to locally applicable regulations.
Do not modify the product in any way. Doing so
voids the warranty.
Keep this product, as all electrical products, out
of the reach of children!
.
.
.
4. System Requirements
The Card Reader supports the following operating
systems:
e Windows XP / Vista / 7 18
* Mac OS 9.x or higher
5. Product Features
The product supports the following memory cards:
+ microSD / microSDHC / microSDXC
6. Getting started
* The USB 3.0 Card Reader is backwards
compatible to USB 2.0 and USB 1.1.
* No additional drivers are needed. The
installation runs automatically.
* Plug your memory card into the slot of the Card
Reader.
* Connect the USB 3.0 Card Reader to an available
USB port on your computer. You can now run the
data transfer between your computer and the
memory card.
For running the Card Reader with USB 3.0,
your computer must have a USB 3.0 interface
and an accurate installed USB 3.0 driver.
The installation runs automatically too.
©
05.06.14 07:2