Cleaning And Care - Peach PS600-20 Manual De Instrucciones

Bug fixing
Overheating:
If you use the unit for more than 20 mi-
nutes without interruption with maximum
load, it will automatically switch off. The
"Overheat"
7
ter a waiting time of approx. 40 minutes,
the device can be used again.
Door open:
If the "Service door paper jam"
fully engaged, the "Door Open" signal
lights up. Press down the "Service door
paper jam"
15
can be heard.
Paper jam:
In the event of a paper jam, the machine
stops automatically and starts to reverse.
The paper is released again.
When using the manual feed, remove
the paper from the machine, reduce the
number of pages and restart.
If you are using the auto feed, follow
these steps: Remove the already rele-
sed paper. If some paper hasn't been
released press the "REV" button
remove the jammed paper. Destroy the
jammed paper in the manual feed.
If, in an exceptional case, the automatic
feed still does not work properly, switch
the main switch
"Service doot paper jam"
the jammed paper with a suitable tool.

Cleaning and care

Empty the wastebasket
the "Bin-Full" signal light
do this, pull the waste bin out of the de-
vice by pulling the handle, empty it and
put it back into place.
Occasionally insert a small amount of
oiled paper into the cutting opening and
run the machine in FWD mode
10
signal lamp lights up. Af-
15
until it a "clicks sound"
to "0". Lift up the
1
and remove
15
as soon as
11
lights up. To
8
4
about 10 seconds. Use PEACH oiled
paper PS100-00 or alternatively Peach
document shredder special oil PS100-
05.
is not
9
to
5
for