Idiomas disponibles
Idiomas disponibles
Washer
2. Handle Valve Installation
Slide a gasket onto each valve body.
NOTE: The valve body marked "Cold" (with blue lettered tape
attached to the tube) should be installed to the right of the faucet.
Insert the valve bodies into the proper mounting holes.
Install a washer and a nut onto the underside of each valve body.
Rotate each valve body until the copper tubing faces towards the
outside of the lavatory.
While holding the valve bodies in place, securely tighten the
locknuts with a wrench. Do not overtighten.
1011142-2-B
Valve Body
Gasket
Nut
4
Kohler Co.
