Idiomas disponibles
Idiomas disponibles
CORDLESS IMPACT DRIVER
PDSSA 20-Li B2
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as described
and for the range of applications specified. Please
also pass these operating instructions on to any
future owner.
Intended use
This appliance is intended for screwing in and
unscrewing screws as well as for tightening and
loosening nuts. The appliance has clockwise/
anticlockwise rotation, a 1/4" hexagon socket bit
holder and an LED working light. The light on this
appliance is intended to illuminate the immediate
work area of the appliance. The rotary impact
function of the appliance enables the power of the
motor to be converted into uniform rotary impacts.
The impact mechanism comes into effect during
tightening and loosening.
The appliance is designed for use by adults.
Young people under 16 years of age may only
use the appliance under supervision. The manufac-
turer accepts no liability for damages caused by
improper use or incorrect operation of the appli-
ance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
│
GB │ IE
■
2
Features
Tool holder
Locking sleeve
Bit holder (magnetic)
Rotation direction switch/lock
Belt clip
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
LED work light
ON/OFF switch/Speed control
Adapter to 1/4" square
Bit holder
High-speed charger*
Red charge control LED
Green charge control LED
Package contents
1 cordless impact driver
1 adapter from hex (1/4") to square
1 1/4" extension (50 mm)
1 belt clip
1 carrying case
1 set of operating instructions
Technical data
Cordless impact driver PDSSA 20-Li B2
Rated voltage
Idle speed
Rated stroke rate
Max. torque
Suitable for metal screws ≤ M8
Suitable for wood screws ≤ 8 mm Ø
Tool holder
20 V
(DC)
n
0–2800 rpm
0
0–3600 ipm
180 Nm
1/4"
PDSSA 20-Li B2
