Operation; Taking A Picture - Sony UPX-DP10 Manual De Instrucciones

Operation

Taking a Picture

1
Set the POWER switch to ON.
2
Set the PLAY/CAMERA switch to CAMERA.
The standby lamp lights in green.
3
Set the LCD MONITOR switch to ON.
After a few seconds, a picture appears on the LCD.
4
Press the flash mode button according to the lighting conditions.
is recommended. The built-in strobe flashes synchronized with your
pressing the release button.
5
Press the H/S button to select the resolution mode.
6
Point the camera at the subject, and adjust the frame by monitoring the
LCD of the camera.
Zooming is available by pressing the zoom lever.
7
Press the release button on the camera.
The standby lamp starts flashing in red. Once the picture is stored in
memory, flashing stops and the standby lamp lights in green.
After the picture is stored in memory, the picture is reviewed on the LCD.
To release the review, press the release button halfway.
4
5
P L A Y
C A M
E R A
W
T
L C D
M O N
IT O R
O N
O F F
M O D
E
S E T
Standby lamp
7
1
6
2
3
41