Idiomas disponibles
Idiomas disponibles
SPECIFICATIOBON-P-EA68
Maximum power Output
Maximum output speed
Maximum drill bit rotation speed
Fuel tank capacity
Transmission ratio
Sprocket structure
Drill Bit Size
Top Tip Type
Displacement
Weight
Specifications are subject to change without notice.
UNPACKING
◼ Carefully remove the tool and any accessories from the box.Make sure that all
items listed шn the packing list are included.
◼ Inspect the tool carefully to make sure no breakage or damage occurred during
shipping.
◼ Do not discard the packing material until you have carefully inspected and
satisfactorily
Operated the tool.
WARNING!
If any parts are missing do not operate this tool until the missing parts are
replaced.Failure to do so could result in possible serious injury.
WARNING!
Do not attempt to modify this tool or create accessories not recommended for
use with this tool.Any such attention or modification is misuse and could result in a
hazardous condition leading to possible serious personal injury.
FITTING THE AUGER BITS
Align the engine drive shaft into the seat on the auger bit and secure it using the
appropriate gudgeon pin and cotter pin.
3.0 HP
9600 ± 300 rpm
360 RPM
1000 ml
26.4:1
Helical (rounded corner)
φ 50mm - 300mm
Twist Type Top
68 CC
9.5 Kg
ASSEMBLY
