Idiomas disponibles
Idiomas disponibles
NOTE:Keep all bystanders,especially children and pets ,at least 3m
from the operating area.
FUEL AND REFUELING SAFETY
◼ Always handle fuel with care,its highly flammable.
◼ Always refuel outdoors where there are no sparks and flames.Do not inhale fuel
vapours.
◼ Do not let petrol and oil come in contact with your skin.
◼ Keep petrol and oil away from the eyes.If petrol or oil comes in contact with
eyes,wash them immediately with clean water.If irration is still present,see a
doctor immediately.
◼ Clean up spilled petrol immediately.
MIXING THE FUEL
◼ This product is powered by a 2-stroke engine and requires pre-mixing of petrol
and 2-stroke oil.pre-mix unleaded petrol and 2-stroke engine oil in a clean
container approved for petrol.
◼ This engine is certified to operate on unleaded petrol intended for automotive use
with anoctane rating of 90([R+M]/2) or higher.
◼ Do not use Ethanol fuels containing Ethanol. The use of Ethanol fuels may void
your warranty.
◼ Do not use any type of pre-mixed petrol/oil from fuel service stations, this includes
The pre-mixed petrol/oil intended for use in mopeds, motorcycles, etc.
◼ Use synthetic 2-stroke oil only. Do not use automotive oil or 2-stroke outboard oil.
◼ Mix synthetic 2-stroke oil into the petrol.This is a 25:1 ratio.
◼ Mix the fuel thoroughly and also each time before fuelling.
◼ Mix in small quantities.Do not mix quantities larger than usable in a 30 day period.
Synthetic 2-stroke oil containing a fuel stabilizer is recommended.
FILLING THE TANK
◼ Clean surface around fuel cap to prevent contamination.
◼ Lossen fuel cap slowly to release pressure and to keep fuel from escaping around
the cap.
◼ Carefully pour fuel mixture into the tank. Avoid spillage.
◼ Prior to replacing the fuel cap,clean and inspect the gasket.
◼ Immediately replace fuel cap and hard tighten.
◼ Wipe up any fuel spillage.Move 9m away from refueling site before starting
engine.
