Idiomas disponibles
Idiomas disponibles
Move 9m away from refueling site before starting engine.
◼
Stop the engine and allow to cool before refueling or storing the unit.
◼
Allow the engine to cool;empty the fuel tank and secure the unit from moving
Before transporting in a vehicle.
SPECIFIC SAFETY RULES FOR EARTH AUGER MACHINE USE
◼
Replace augers if cracked,bent,or damaged in anyway.Be sure the auger and or
Extention shaft is properly installed and securely fastened.Failure to do so can cause
Serious injury.
◼
Make sure all guards,straps,deflectors and handles are properly and securely attached.
◼
Do not start working until you have a clear work area.Do not work near electric cables
Or underground utilities.It is highly recommended that you check with local authorities
Before starting to drill.
◼
If auger turns whilst the engine is idling,stop the engine and immediately adjust the idle
Settings following the instructions in this manual.
◼
Use only the manufacturer's replacement augers on this unit.Do not use any
Other attachments.
◼
Never operate until without the safety clutch in working condition.The safety clutch
Will engage when the engine is at idle or if a hard object is struck.
◼
Replace the bit immediately if any cracks or other damage are present.
◼
Maintain a firm grip on both handles during operation.
◼
Never use the drill with the handles above waist level.Drilling with the units handles above
Waist level restricts control and can cause serious chest injuries if a hand object is struck
◼
Never carry the power drill with the engine running.
◼
Carry the power drill with the engine stopped,and with the auger bit removed.
◼
Never drill in a horizontal angle.This drill should only be operated with the auger at
a 90°angle to the ground(see figure 7a)
◼
Always keep the handles dry and clean.
◼
Before starting to drill make sure the bit is not obstructed.
◼
Always work in a firm-footed and safe position.
◼
Never touch the auger bit or carry out maintenance with the engine running.
◼
Grip the earth auger machine firmly with both hands and keep all parts of the rountine
maintenance.For other repairs ,have the earth auger machine serviced by an authorized
repair.
◼
Store th e power drill off the ground in a vertical position in a dry place and with fuel tank
empty.
◼
If the auger bit jams,stop the engine immediately.
IMPORTANT:some of the following symbols may be used on your tool.Please study them and
Learn their meaning.Proper interpretation of these symbols will allow you to operate the tool
Better and safer.
SYMBOLS
