Idiomas disponibles
Idiomas disponibles
Testing Your Blood Glucose
Materials you will need:
• Your Embrace
• A new Embrace
• Lancing device with a sterile, unused lancet
• Clear cap for Alternative Site Testing (AST) on palm and forearm
Before you begin, make sure:
• Set up your meter properly and run a control test. See Setting Up Your New System on
page 17 and Control Solution Testing on page 31 for details.
• Wash your hands and the testing site thoroughly with soap and warm water, and dry
well.
• You are testing in an area within the temperature ranges of 41˚F~113˚F and relative
humidity ranges of 20~90%. Your meter will not test outside of this range and will display
thermometer icon. Move the meter into an area that is within 41˚F~113˚F and 20~90%
RH, and let it sit for 10 to 15 minutes before testing again.
• If the meter is being operated by a second person who is providing testing assistance
to you, the meter and lancing device should be cleaned and disinfected (Page 59)
appropriately when testing is conducted by the second person.
38
®
WAVE+ Blood Glucose Meter
®
WAVE Blood Glucose Test Strip
