Idiomas disponibles
Idiomas disponibles
If both rechargeable batteries are inserted next to
each other on the same side, fi rst one will charge
and then the other will be charged. Check the yel-
low LED lights in this regard (see 4.2).
5. Cleaning and maintenance
Always pull out the power plug before starting any
cleaning work.
The equipment is not allowed to be stored in a
damp location or where there are caustic gases.
Keep it in a dry place out of the reach of children.
5.1 Cleaning
Keep the surface of the equipment clean and
wipe it only with a dry cloth.
6. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
7. Storage
Store the equipment and its accessories out of
children's reach in a dark and dry place at above
freezing temperature. The ideal storage tempera-
ture is between 41°F and 86°F
(5°C and 30°C). Keep the electric tool in its origi-
nal packaging.
Federal Communications Commission (FCC)
WARNING! Any changes or modifi cations
to this unit not expressly approved by the part
responsible for compliance could void the user's
authority to operate the equipment.
Anl_PXC_Quattrocharger_4A_SPK7_USA.indb 7
Anl_PXC_Quattrocharger_4A_SPK7_USA.indb 7
EN
Class B device:
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used
in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the
equipment and receiver.
•
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
•
Consult the dealer or an experienced radio/
TV technician for help.
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of
Einhell Germany AG.
Subject to technical changes
- 7 -
18.07.2023 14:13:31
18.07.2023 14:13:31
