Idiomas disponibles
Idiomas disponibles
ENGLISH
4. OPERATION
Control panel
Use the appliance in accordance with the following instructions on the control panel (Fig. 7).
Temperature adjustment
For optimal food preservation, it is recommended to set the freezer temperature to -18°C
-
during the first use.
If you wish to modify the temperature, follow the instructions below.
-
Warning: when a temperature is set, this is an average temperature for the entire freezer, the
temperatures inside each compartment may vary from the temperature shown on the control
panel display, depending on how much food you store and where you place it. A high or low
ambient temperature can also affect the actual temperature inside the appliance.
Switch-on
1.
Press and hold the "POWER" button for 3 seconds to turn the device on or off. When
-
the freezer is switched on, the display will show "- -". If no button has been pressed, the
display will turn off after approximately 1 minute.
If you want to deactivate the power-on function, make sure that the control panel is
-
illuminated. If not, you can press any button to turn it on.
IMPORTANT!
If the freezer is switched on but the display shows "- -", the appliance will stop cooling.
-
If you are not going to use the freezer for a long time, unplug it.
-
FAST FREEZING FUNCTION
2.
The Fast Freezing function will quickly lower the freezer temperature to allow food to
-
freeze faster. This can preserve the vitamins and nutrients of fresh food.
Press the button to activate the Fast Freezing function and its icon light will turn on. The
-
display will show -24 ºC.
-
This function will automatically switch off after 52 hours.
-
When the function is activated, you can deactivate it by pressing the button again. The
freezer temperature setting will return to the previous setting.
3.
Temperature
Press the button to adjust the freezer temperature between -14ºC and -24ºC as required. The
control panel display will show the corresponding values in the following sequence.
58
