OWNERS MANUAL
AquaWash
™
Manual Bidet Seat
Model # 8043A60G
INSTALLATION INSTRUCTIONS
Thank you for selecting American Standard – the benchmark of fine quality for over 150 years.
To ensure this product is installed properly, please read these instructions carefully before you
begin. Certain installations may require professional help.
Inspect your product thoroughly before installing. Take extra care in handling surfaces of the
bidet seat and use only non-abrasive cloths to avoid scratching. Report any damages or missing
parts immediately to customer care by calling 855-815-0004. Follow the prompts for consumer/
bathing. Local building codes vary by location.
• Observe all local plumbing and building codes.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.
CAUTION
• The water pressure limit is from 0.07 to 0.6 MPa (10-87PSI). Please use as instructed.
• The water shut-off valve should be near to where the product can be installed and dismantled.
760422-100 (6/23)
Essentials