Idiomas disponibles
Idiomas disponibles
GB
MT
edge or individuals who are not
familiar with the instructions.
Children should be supervised
to ensure that they do not play
with the device.
• Cleaning and maintenance must
not be carried out by children.
• Always disconnect the device
from the power supply before
assembling, disassembling or
cleaning.
• Children should be supervised
to ensure that they do not play
with the device.
• The machine must not be used
at altitudes over 2000 m.
• Contamination of the liquid can
occur when the lubricant leaks
out.
• See further information in the
section on "Maintenance and
Cleaning".
General notes on safety
This section deals with the basic
safety regulations to be observed
when working with the machine.
Working with the equipment:
Caution: to avoid accidents
and injuries:
• People who are unfamiliar
with the operating instructions
are not permitted to use the
equipment. Local regulations or
bylaws may determine the mini-
mum age for using the device.
22
• Wear sturdy footwear to protect
against electric shock.
• Should there be people in the
water, do not operate the equip-
ment. Risk of electric shock!
• Take appropriate measures to
keep children away from the
equipment whilst it is running.
There is a risk of injury!
• Do not use the equipment in the
vicinity of fl ammable liquids or
gases. Non-observance will re-
sult in a risk of fi re or explosion.
• The transfer of aggressive, abra-
sive (grinding effect), corrosive,
combustible (e.g. motor fuels)
or explosive liquids, salt water,
cleaning agents and foodstuffs
is not permitted. The tempera-
ture of the liquid being trans-
ported must not exceed 35 °C.
• Store the equipment in a dry
place and out of reach of chil-
dren.
Caution! To avoid damage to
the equipment and any pos-
sible person injury resulting
from this:
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
• Monitor the equipment dur-
