Astralpool EVOTOP INVERBOOST 05 Manual Del Usuario página 37

8.1 Error code display on LED wire controller
Malfunction
Inlet water temperature
sensor failure
Outlet water temperature
sensor failure
Heating piping sensor failure
Gas return sensor failure
Ambient temperature sensor
failure
Exhaust piping sensor
failure
Antifreeze protection
Winter
Low ambient temperature
protection
Piping temperature too high
protection under cooling
mode
T2 water temp. Too low
protection under cooling
mode
High pressure failure
8. 8. 8. Troubleshooting Troubleshooting Troubleshooting
Error code
1. The sensor in open or short
PP01 circuit
2. The wiring of sensor is loose
1. The sensor in open or short
PP02 circuit
2. The wiring of sensor is loose
1. The sensor in open or short
PP03 circuit
2. The wiring of sensor is loose
1. The sensor in open or short
PP04 circuit
2. The wiring of sensor is loose
1. The sensor in open or short
PP05 circuit
2. The wiring of sensor is loose
1. The sensor in open or short
PP06 circuit
2. The wiring of sensor is loose
in Ambient temperature or water
PP07
inlet temperature is too low
1.Beyond the scope of using
PP08 environment
2. Sensor abnormality
1. Ambient temperature is too
high or the water temperature is
PP10 too high in cooling mode
2.
abnormal
1. Low water flow
PP11 2. T2
abnormal
1. Ambient temperature is too
high
2. Water temperature is too high
EE01
3. Water flow is too low
Fan motor speed is abnormal or
fan motor has damaged
Reason
Refrigeration system
temperature sensor
- 33 -
Solution
1. Check or change the sensor
2.Re-fix the wiring of the sensors
1. Check or change the sensor
2.Re-fix the wiring of the sensors
1. Check or change the sensor
2.Re-fix the wiring of the sensors
1. Check or change the sensor
2.Re-fix the wiring of the sensors
1. Check or change the sensor
2.Re-fix the wiring of the sensors
1. Check or change the sensor
2.Re-fix the wiring of the sensors
Normal protection
1. Stop using, beyond the scope
of using
2.Change the sensor
1. Check the scope of using
2. Check refrigeration system
is
1. Check water
waterway system
2. Change T2 temperature sensor
1. Check the water flow or water
pump
2. Check the fan motor
3. Check and repair the piping
system
pump and