Idiomas disponibles
Idiomas disponibles
ENGL ISH
Thank you very much for choosing our heater. Before using the appliance, read these instruc-
tions carefully for its correct use.
The listed safety precautions will reduce the risk of death, injury and electric shock if strict-
ly followed. Keep this manual in a safe place for future reference, along with the original
product packaging and proof of purchase. If possible, pass these instructions on to the next
owner of the appliance. Follow basic safety precautions and accident prevention rules at all
times when using an appliance. We decline all liability arising from non-compliance with
these instructions by the client.
When using any appliance, basic safety measures must be respected
at all times:
• Before use, check that the heater and all supplied accessories are
complete and intact.
• The heater must be installed following the installation instructions.
The heater must be plugged into an outlet that meets the following
requirements: 220-240 V AC, frequency 50/60 Hz.
• The heater is only suitable for indoor use. Do not use it outdoors.
• Do not leave heater unattended during use. Keep the heater out of the
reach of children, as there is a risk of burns.
• Do not use an external controller with the heater.
• Do not use the heater near flammable or explosive materials, as there
is a risk of fire or explosion.
• It is strictly forbidden to insert objects into the protection grille of the
heater, as there is a risk of electric shock.
• Do not touch the metal casing as it becomes hot during use and you
may be at risk of burns. Wait for the heater to cool down before put-
ting it away.
• Unplug the heater if it is not going to be used for a long period of time.
• Before using the electric heater, check that it is in good condition and
intact. Do not plug in or use heater if housing, cord, or plug is damaged.
• The heating element could be damaged if the heater is dropped or hit.
Check the heating element for damage before each use. Do not use
the heater if it is broken.
• Disconnect plug from outlet when moving or cleaning heater. At the
time of disconnection, please turn off the switch first, then unplug
the plug. Do not pull on the cord.
6
E NGL I SH
SECURITY INSTRUCTIONS
