Idiomas disponibles
Idiomas disponibles
USING TH E CR EATE HO ME APP
You can use the app to control multiple devices. The status of your devices is displayed in
the device list:
• Disconnected (the device is turned off at the switch).
• Off (device is in standby mode).
• Power on (device is in warm-up mode).
When the device is connected, select the device name to go to the control interface.
Note: if the device is unplugged, you will not be able to control it with the app.
HEATE R CON TROL
You can change the current heater mode by touching the mode buttons. You can adjust the
mode temperature by using the + and – buttons when in the mode.
SC H E DU LE TH E H EATE R
You can schedule your heater by creating a schedule of "events" to turn it on and off. These
events can be temporary, such as a timer being set, or they can be repeated, so that the
heater turns on at the same time throughout the week. You can set an unlimited number of
events, turning the heater on and off throughout the week.
For each event, you must set the start time. Then choose if you want it to repeat. Select "Only
once" if you want to set a timer for now. If you want the event to repeat, select the days you
want it to repeat. Lastly, choose whether you want the heater to turn on or off. Confirm the
settings in each step and tap Save to store the event.
All events will appear on your calendar. You can turn events on and off whenever you want.
You can also delete events by scrolling left and selecting the Delete option.
The heater will beep when a new heating event begins. The heater will heat in the mode it
was last set to: you cannot program mode changes. Note that if you change the heater set-
ting during an event (ie turning it on when it was scheduled to be off), the heater will remain
as it is until the next scheduled event.
OTHER FEATURES
Scenes
It gathers all its devices to respond to environmental conditions. Event triggering includes
temperature, humidity levels, air quality, sunrise and sunset, and device behavior. So, for
example, you can set the windows to close every time the heater comes on, or the lights to
come on, the curtains to close, and the heater to come on when the sun goes down. Only
devices connected to the app can be used in these views.
Share
You can share control of devices with your family members. Go to "Share devices", select the
devices you want to share and hit the option Share with new member. You can then add the
email address or phone number. If they have the app, the device will appear in their list of
devices. If they don't have the app, they will receive a link to download it.
Note: you can only share with numbers and email addresses that are connected to compati-
ble devices: smartphones or tablets.
E NGLI SH
11
