English
Owner´s manual
•
• Always wear protective gloves and mask!
• Release the compressor pressure to avoid material damage. You can, for example, connect a compressed
air blow gun to the compressor and thus empty the pressure tank.
• Replace the oil after the first 100 hours of operation and every 300 hours thereafter (Fig. 14). Remember
to check the oil level at regular intervals. Use SAE 15W-40 premium quality oil.
• To protect it from dirt, the compressor should be covered after each use. The packaging can be used to
store the compressor.
• Do not cover the compressor until it has cooled down completely.
• Store the compressor and its instruction manual together. Store the machine and its accessories in a
dark, dry, dust-free and frost-free place.
FUNCTION
Cleaning of the inlet filter and/or replacement
of the filter element
Oil change
Tightening of the head tension rods
Tank purge
Environmental protection
Take the machine to a clean point. Do not reuse components as spare parts as they may be damaged.
Ensure that parts such as oils, cables and similar do not come into contact with the environment at the
end of their service life. The compressor must be disposed of in accordance with the methods provided
for by local regulations.
Exhausted and condensed oil MUST BE DISPOSED of in accordance with environmental protection
standards and current legislation.
Waste electrical products should not be disposed of with normal household waste.
Recycle at appropriate facilities. Consult your local authority or retailer for recycling
advice.
Do not place packaging in ordinary garbage for disposal, be sure to recycle the
cardboard. Recycle unwanted materials instead of disposing of them as waste. All
tools, hoses and packaging should be sorted, taken to the local recycling center and
disposed of in an environmentally safe manner.
Fig. 15
MAINTENANCE
AFTER THE FIRST 100 HOURS
-
At start-up and after the first hour of operation
Periodically and at the end of the work
Fig. 16
EVERY 100 HOURS
EVERY 300 HOURS
-
-
31