Idiomas disponibles
Idiomas disponibles
Box content (Appendix 1)
1.
Cirrus 3 Iron Steamer
2.
Steaming Pad
3.
Mouthpiece protective cover
4.
Storage bag
5.
User manual
Features (Appendix 2)
1.
Heated front plate
2.
Convex front plate
3.
Stand up/lie down function
4.
Steam button
5.
On/off switch
6.
Auto-shutdown
7.
Water tank
8.
Woven cord
Heated front plate
The front plate of Cirrus 3 Iron Steamer heats up to an
equivalence of level 1 on an iron (140°C / 284°F).
Convex front plate
The convex and textured surface has been developed to
enhance the friction between the mouthpiece and the fabric.
This effect will ease the process of smoothing out wrinkles.
Stand up/lie down function
Cirrus 3 Iron Steamer can be placed lying down on a flat
surface, and thanks to the solid base, it can also stand on
its own in an upright position.
Steam button
Press only while steaming in order to save water.
On/off switch
Leave the steamer plugged in while not in use and save time.
Auto-shutdown
The steamer will automatically power off after 30 minutes
of being idle.
Water tank
The stable upright water tank slides into the body of
the steamer with a smooth magnetic click and secure
fit, regardless of the amount of water left in the 90 ml
water tank.
Water and water quality
Even though Cirrus 3 Iron Steamer has limescale traps,
it is important to use the right water in your steamer to
prolong its life. Cirrus 3 Iron Steamer works on regular tap
water, but make sure the water you are using is soft. If
you live in a region with hard water, or if you are traveling
and feel uncertain about the tap water quality, don't use
tap water.
We recommend:
•
Soft tap water
•
Steamery's Steam Water
•
Bottled or filtered still water (i.e., water meant for
drinking)
•
Distilled water
•
Deionized water (also known as battery water)
•
Unscented ironing water
Scan QR-code to
purchase Steam Water
User manual
We do not recommend:
•
Hard tap water
•
Liquids other than water
User instructions (Appendix 3)
Preparations
1.
Remove the water tank by pulling it in the opposite
direction from the steamer body.
2.
Gently lift the silicone plug on top of the water
container and fill it.
3.
Close the water tank and put it back in position in
the steamer.
4.
Remove the mouthpiece protective cover from the
front plate.
Operating instructions
1.
Plug the cord into a power outlet, press the on/off
button.
2.
Wait for approximately 25 seconds. The breathing
light indicates that the steamer is heating up.
3.
As soon as the light is steady, the steamer has
reached the right temperature, and the front plate
is warm enough.
4.
Start steaming.
How to steam (Appendix 4)
Place your garment on a hanger and move the front plate
against the fabric while pressing the steam button. Do not
use the steamer for more than 30 minutes continuously. If
you wish to use your steamer for more than 30 minutes, let
it cool off for one hour in between uses.
Steaming from the outside
Grab the bottom of the garment and press the steamer
against the fabric.
Steaming from the inside
Place the steamer on the inside of your garment, with
the front plate towards you. Slowly move the mouthpiece
against the fabric.
Use the Steaming Pad
Use the Steaming Pad to press the fabric against the
steamer. This tool is great for steaming details like collars,
cuffs, pockets, and hems.
Use as an iron
The steamer can also be used like an iron. Use a towel as
a base for your clothes and press with the steamer as an
iron. Great when you want a pressed effect.
Scan the QR code to learn
more about how to use a
steamer
Travel with Cirrus 3 Iron Steamer
•
Cirrus 3 Iron Steamer is a great travel accessory
that will keep your clothes wrinkle-free and fresh
when you need to wear a limited wardrobe for days
on end. But there are a few things to keep in mind.
•
Check the voltage and frequency of your destination
•
Before traveling with your steamer, it is important to
3
EN
