Tabla de contenido
Idiomas disponibles
Idiomas disponibles
®
INSTRUCTIONS FOR USE
1. Make sure the cutting blade is dry and in good condition prior to use.
2. Do not use if the cutting head (A) or any other parts are damaged.
3. Be sure to turn off the clipper before removing or changing any accessories.
4. For best results, wash and dry hair as usual and brush in the direction of natural hair
growth to remove any knots before clipping.
5. Avoid use on hair with excessive product build-up such as mousse, gel, hairspray, etc.
6. To turn the clipper on, lower the lever (L) to the down position (Fig. 2).
7. To use with a guided comb (G), choose the desired size and place it on the edge of the
cutting head (A) and press firmly towards the handle until the head is fully engaged.
8. The clipper can be used with or without a guided comb; Use without the guided comb
attachment to achieve more precise cuts very close to the skin.
9. For optimal results operate the clipper against (in the opposite) direction of natural hair
growth starting with the largest size comb and gradually reduce comb size until the de-
sired result is achieved.
10. To remove guided comb, unhook from the blade base and and slide off the clipper.
11. If the adjustable guide comb becomes clogged during use, remove it from the clipper
and clean with enclosed brush (J) or by blowing with air.
CUSTOMIZING THE BODY COVER
12. To remove the outer cover of the clipper, unscrew the four screws located on the rear
with enclosed mini screwdriver (H).
13. Once all screws have been removed, gently remove the outer cover with hands; no tool
required.
14. Replace with desired outer cover ensuring proper placement of all components, espe-
cially the charging outlets.
15. Replace and tighten all screws before use.
Tabla de contenido
