Charging Instructions - STYLECRAFT PRO INSTINCT-X Manual Del Usuario

®
3. Intended for use on human hair only. Use with wigs, animal fur or any other material
voids the manufacturer's warranty.
4. It is normal for the device to get hot during use and while charging.
5. Designed for use at temperatures between 32°F and 104°F.
6. Do not insert any foreign objects into the device.
7. Those with physical, sensory and/or mental disabilities should be cautioned of dangers
before use.
8. In the event of damage from a fall, significant impact, or other malfunction do not at-
tempt to take apart and contact customer service at (888) 864-6409.

CHARGING INSTRUCTIONS

1. Ensure the clipper is completely dry before charging.
2. Make sure the switch (B) is in the "OFF" position before charging.
3. Charge completely before use, if LED is blinking, and at least one time annually.
4. Do not completely discharge the battery in case you wish to use the device while con-
nected to the power supply.
5. Do not recharge the appliance if the ambient temperature is below 32 °F or
above 104 °F.
6. The appliance can be charged by connecting the adaptor directly to the appliance or by
connecting the mini-USB cable (E).
7. To charge directly, connect the power adaptor connector (F) to the power supply socket
outlet (C) located at the bottom of the device.
8. To charge using the base connect the device to the charging base (I), connect the pow-
er supply socket (C) and insert the AC/DC power adapter with cable (F) into the electrical
socket.
9. While charging, the blue LED will blink and remain "ON" once fully charged.
10. To charge by USB connection, connect the mini-USB charging cable (E) to the mini-
USB outlet of the clipper (D) and a suitable power source.
Note: This device can be operated cordless battery powered or while connected to the
power supply. For the most rapid charge use the direct method; USB charging can take
significantly more time to fully charge.