Tennant T1581 Manual De Instrucciones página 39

button.
To change the value of the selected parameter, press the "-" or "+" button: "-" to decrease, "+" to increase.
To store the changes and exit, press and hold the programming button until the display shows the battery voltage.
Simply returning the ignition key to "0" will not cancel the changes that have been made; to clear the changes, set the
default values shown below and select save.
Language setting.
Head working pressure
Enable brushes
Enable vacuum unit.
Enable Power OFF- ON.
Head working pressure
Enable brushes
Enable vacuum unit.
Enable Power OFF- ON.
Head working pressure
Enable brushes
Enable vacuum unit.
Enable Power OFF- ON.
USER MENU
Disc Head version
ENGLISH
Program 1
Pressure 020
Program 1
Brushes ON
Program 1
Vacuum unit ON
Program 1
Water 2
Program 1
Auto Power OFF ON
Program 2
Pressure 040
Program 2
Brushes ON
Program 2
Vacuum unit ON
Program 2
Water 3
Program 2
Auto Power OFF ON
Program 3
Pressure 060
Program 3
Brushes ON
Program 3
Vacuum unit ON
Program 3
AUTO water
Program 3
Auto Power OFF ON
2%
EN
DEFAULT VALUES
Roller Head version
ENGLISH
Program 1
Pressure 020
Program 1
Brushes ON
Program 1
Vacuum unit ON
Program 1
Water 2
Program 1
Auto Power OFF ON
Program 2
Pressure 030
Program 2
Brushes ON
Program 2
Vacuum unit ON
Program 2
Water 3
Program 2
Auto Power OFF ON
Program 3
Pressure 040
Program 3
Brushes ON
Program 3
Vacuum unit ON
Program 3
Water 3
Program 3
Auto Power OFF ON
2%
39