PRACTICAL GUIDE FOR THE
OPERATOR
Clothing and equipment
Wear safety shoes with non-slip soles.
Wear protective eyewear or visor and safety garments.
Depending on the surface being cleaned and on the envi-
ronment, the protective measures necessary for atomized
sprays include respiratory masks with class FFP2 or equiv-
alent or higher protection.
Before starting the machine
Clear away larger items of refuse before washing. Pick up
any pieces of wire, tape, string and similar items that could
become entangled around the brushes.
Before washing is commenced, sweep the area so as to
Preparing the machine for work
Proceed as follows before starting work:
-
Check that the batteries are fully charged, and
if not, carry out the recharging procedure: when
undertaking this operation, refer to the section
"Charging the batteries".
-
Make certain that the dirty water tank is empty,
and if not, empty it, referring to the section "Emp-
-
Make certain that the solution tank is full, and if
-
! NOTICE
For maximum comfort when using the machine, the
position of the operator seat can be adjusted.
Working
reading the operating and maintenance manual.
.
! NOTICE
"Fill-
Releasing the accelerator pedal, all of the functions
.
are stopped automatically within 5 seconds (Power
corresponding to the selected program will blink. To
reactivate the functions, simply move the machine
On).
! NOTICE
Whenever the machine moves in reverse, the
squeegee is raised automatically to prevent any
possible damage.
EN
! DANGER: Never use the machine to clean up
oil, etc.), acids or solvents (e.g. paint thinners,
acetone etc.) even if diluted.
21