Invacare Aquatec ORCA Manual Del Usuario página 17

Elevador de banera
Ocultar thumbs Ver también para Aquatec ORCA:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 123
Risk of Damage
– The hand control may only be used when the
backrest is properly installed and in the upright
position.
If the battery in the hand control C is not sufficiently
charged, the indicator lamp E lights up red when
the Down button D is pressed. In this case, the
lowering function of the bath lift is disabled. You can
however still raise the lift.
1. Recharge the battery immediately after raising the bath
lift.
Raising Bath Lift
If the backrest is lowered, it will move into the
upright position first (not on model ORCA F)
1. Press the Up button B on the hand control and keep it
pressed.
The backrest moves into the upright position or the
seat moves upwards.
2. Release the Up button on the hand control.
The bath lift stops in the current position.
Lowering Bath Lift
If the seat is already lowered, the backrest lowers
towards the rear (not on model ORCA F).
1574469-F
1. Press the Down button D on the hand control and
keep it pressed.
The seat moves downwards or the backrest tilts to the
rear.
2. Release the Down button on the hand control.
The bath lift stops in the current position.
Emergency Stop Button
Risk of Damage
Only press the emergency stop button A if the
device does not stop immediately when the Up or
Down button is released (e.g. if a button jams).
The bath lift stops moving immediately and the
indicator lamp on the hand control lights up.
If the lifter no longer responds when pressing the Up or
Down buttons after releasing the emergency stop button,
the error has not been corrected. The device is not ready
for use and must be repaired, for example, in case of an
electronic damage.
Contact your provider, if necessary.
Usage
17
loading

Este manual también es adecuado para:

Aquatec orca fAquatec orca xl