If the device is to be connected to a drinking water supply,
install a disconnector on the water pipe to prevent dirty water
from backing up and entering the drinking water system. The
disconnector shall comply with EN 60335-2-79 ANNEX A.
Water that has flowed through backflow prevention devices is
considered non-drinkable.
This device must not be controlled by external switching
elements such as timers, or connected to electrical circuits
that are continuously switched on and off.
Release the trigger when switching from high to low pressure.
Setting the nozzle.
Keep the high-pressure hose away from sharp objects. The
burst of a high-pressure hose could cause injury. Inspect the
high-pressure hose regularly and replace it if necessary. Do
not try to fix a damaged high-pressure hose.
Keep all connections dry and off the ground to avoid risk of
electric shock. Do not touch the plug with your hands wet.
Do not use a higher pressure than that permitted by the parts of
the pressurisation system (high-pressure hose, connections,
etc.). Make sure every component and accessory can withstand
the maximum operating pressure of the unit.
The appliance should not be used by children. Children must be
supervised to make sure they do not play with the appliance.
This appliance can be used by persons with reduced physical,
sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved.
High-pressure cleaning devices should not be used by children
or untrained personnel.
H I D R O B O O S T 3200 INDUCTION PRO
13