Idiomas disponibles
Idiomas disponibles
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.
Adjusting setup items — SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the volume control dial to
select the setting (example "ON" or
"OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
"
" indicates the default settings.
z
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" (
AUX-A*
1
(AUX Audio)
To turn the AUX source display "AUX-A-ON"
(
) or "AUX-A-OFF" (page 10).
z
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off: "A.OFF-NO" (
"A.OFF-30S (Seconds)," "A.OFF-30M
(Minutes)" or "A.OFF-60M (Minutes)."
SUB/REAR*
1
To switch the audio output.
– "SUB-OUT" (
): to output to a subwoofer.
z
– "REAR-OUT": to output to a power amplifier.
B.OUT (Black out)
To turn off the illumination automatically for
any source (for example, during CD playback/
radio reception, etc.).
– "B.OUT-ON"*
2
: to turn off the illumination if
no operation is performed for 5 seconds.
– "B.OUT-OFF" (
function.
To bring the light back on, press any button.
10
) or "BEEP-OFF."
z
): to deactivate the Black Out
z
DEMO*
1
(Demonstration)
To set "DEMO-ON" (
DIM (Dimmer)
To change the brightness of the display.
– "DIM-AT" (
automatically when you turn lights on.
– "DIM-ON": to dim the display.
– "DIM-OFF": to deactivate the dimmer.
ILM (Illumination)
To change the illumination color: "ILM-1" (
or "ILM-2."
M.DSPL (Motion Display)
To select the Motion Display mode.
– "M.DSPL-SA" (
and spectrum analyzer.
– "M.DSPL-ON": to show moving patterns.
– "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRL (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/group/track is changed.
– "A.SCRL-ON" (
– "A.SCRL-OFF": to not scroll.
LOCAL (Local seek mode)
– "LOCAL-OFF" (
– "LOCAL-ON": to only tune into stations with
stronger signals.
MONO (Monaural mode)*
To improve poor FM reception, select monaural
reception mode.
– "MONO-OFF" (
stereo.
– "MONO-ON": to hear stereo broadcast in
monaural.
LPF*
4
(Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" (
), "LPF125Hz" or "LPF 78Hz."
z
BTM (page 8)
*1 When the unit is turned off.
),
*2 When the Black out function is activated, the unit is
z
activated, the unit cannot be operated with the card
remote commander.
*3 When FM is received.
*4 When the audio output is set to "SUB."
Using optional equipment
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
) or "DEMO-OFF."
z
): to dim the display
z
): to show moving patterns
z
): to scroll.
z
): to tune normal reception.
z
3
): to hear stereo broadcast in
z
)
z
