Idiomas disponibles
Idiomas disponibles
Leveling the Appliance
Check that dishwasher is level.
• Attach level on top front opening of tub from side to
side.
• Attach level on front side of tub.
Make sure that the gap between the door and the tub
is equal on both the left and right sides.
The water level should be checked after the initial fill
on the Normal cycle. If the water level is not near the
center of both tub lower indentations, the dishwasher
may not be correctly leveled. The dishwasher may
leak during operation if it is not correctly leveled.
Water level should be near the center
of both tub lower indentations.
Adjusting the Legs
Adjusting the Front Legs
• Use a flat-blade screwdriver or a pliers to turn the
front legs and adjust the front of the tub.
• Turn the front legs clockwise to raise the front of the
tub and counter-clockwise to lower it.
• The adjustments work identically for both front legs.
Level
Adjusting the Rear Legs
• Use a Phillips screwdriver to adjust the back legs
and the rear of the tub using the center screw at the
base of the appliance in the front.
• Turn the center screw clockwise to raise the rear of
the tub and counter-clockwise to lower it.
NOTE
• To avoid damaging the screw, do not use an electric
screwdriver.
INSTALLATION
17
