•
•
•
Electrical Installation
Direct Connection
The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum
The installer must ensure that the correct electrical connection has been made and that it complies with the
WARNING: THIS IS A CLASS I APPLIANCE AND MUST BE EARTHED
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth
This appliance should be connected directly to the consumer unit with a 3 Amp Residual Current
Device (RCD) protecting its circuit.
To avoid the risks that are always present when you use an electrical appliance it is important that this
8
5059340445915_MNL_IN_V02.indb 8
02-09-2022 11:26:45
