Idiomas disponibles
Idiomas disponibles
CLEANING
THE DEBRIS FILTER
We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
1. Open the filter cover by pressing and pulling the handle
of the filter cover with your finger.
2. Holding the drain cap, pull the drain tube that
is hooked on the guide hook to the front.Do
not pull the drain tube with excessive force.
3. Place a bowl under the washing machine
to catch any remaining water. Then, hold
the drain tube with one hand, and turn the
emergency drain cap counter clockwise with
the other hand to separate it from the drain
tube.
4. Drain the remaining water completely.
Ste p 1
Step 2
5. Pull out the debris cap and debris filter assembly.
6. Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
Deb.s f ,tercap,
Debris filter
,,_y Lq Debris filter
cap
7. When you have finished cleaning the filter, insert the debris
,-,_,_, . .....
cap and filter assembly back into the washer. Turn the
debris filter cap clockwise until the indicator on the debris
.._.
filter cap is in the 12 o'clock position, pointing to the
8. indicatOrRe_attachonthetheemergencyWaSher,
drain cap to the drain tube, and
.
" ........
then hook the tube to the hook guide.
_
9. Re-install the filter cover the filter cover.
30 maintainng
your washer
WF520AB-02838A
EN.indd
30
2010-03-24
£.,kt_4:30:33
