Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2.
Extend the paper pack.
3.
Align the paper pack opening with the dust suction
opening of the cleaner.
4.
Insert the cardboard of the paper pack onto the
holder so that it is positioned at the end beyond the
detent protrusion.
1
► 1. Paper pack 2. Holder
Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
► 1. Holder plate 2. Polyethylene bag
Spread the bag around the top of the tank so that the
prefilter edge can catch and hold the bag securely.
1
► 1. Prefilter
2
NOTE: A polyethylene bag available on the
market can be used. 0.04 mm or thicker one is
recommended.
NOTE: Too much dust will tear the bag easily, so
do not collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
cleaner is switched off and the battery cartridge is
removed before emptying the polyethylene bag.
Failure to do so may cause an electric shock and
serious personal injury.
CAUTION:
tank. Applying a great impact may cause deformation
and damage to the parts.
1
CAUTION:
although this depends on picked-up dust volume
in the tank. Or, the suction force will weaken and the
motor may be broken.
CAUTION:
ing the tank. Grabbing the hook may cause the hook
to break.
2
Unhook and lift up the tank cover.
Shake off the dust from the prefilter and then take the
polyethylene bag out of the tank.
15 ENGLISH
Always make sure that the
Do not apply a great impact on the
Empty the tank at least once a day
Do not grab the hook when empty-
Tabla de contenido
