Getting Started; Charging The Device; Battery Management - Multilaser Diamond Lite Manual Del Usuario

7. Getting started

Charging the device

· Connect the adaptor on the device and the other extremity with plug must be connected
to the socket when the battery is charging, the icon
right of the screen.
· After charged, the battery symbol turns into:
You can use USB cable to charge the device.
You can use the device while charging; however, it will extend the charging time.

Battery management

"The battery is provided with incomplete load, so we recommend charging the battery
for at least 5 hours before using the device, or until the icon
The charging time and discharging time of the battery are limited. However, you can
try the following measures to extend the life of the battery:
· Use the device at least once every week.
· Charge the battery regularly.
· Do not keep the battery too low for long time.
· Always keep the device and battery away from heat source.
Start-up
Press and hold the power switch for five seconds (
will be displayed at the bottom
.
).
10
indicates a full charge.