Honeywell Home TH8732 Instrucciones De Instalación
Honeywell Home TH8732 Instrucciones De Instalación

Honeywell Home TH8732 Instrucciones De Instalación

Placa de la cubierta del termostato inteligente round
Idiomas disponibles

Idiomas disponibles

Smart Round Thermostat Cover
Plate
TH8732 SMART ROUND THERMOSTATS AND COVER
PLATES ARE NO LONGER AVAILABLE
APPLICATION
Use the THP2400A1043 wall cover assembly with the Smart Round Thermostat.
Use the THP2400A1043 wall cover assembly to cover marks on the wall or to mount the thermostat to a 2 in. x 4
in. electrical box.
The THP2400A1043 wall cover assembly contains one wall cover, one bracket, two #6-32 x 5/8" flat head screws
and two #6-32 x 3/8" pan head screws. See Fig. 1.
INSTALLATION
When Installing this Product...
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check ratings given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
6-3/8 (162)
3/4
(19)
TWO #6-32 X 3/8 PAN HEAD SCREWS
TWO #6-32 X 5/8 FLAT HEAD SCREWS
Fig. 1. THP2400A1043 wall cover assembly.
INSTALLATION INSTRUCTIONS
BRACKET
M35406
33-00069EFS-04
Tabla de contenido
loading

Resumen de contenidos para Honeywell Home TH8732

  • Página 9: Placa De La Cubierta Del Termostato Inteligente Round

    Placa de la cubierta del termostato inteligente Round LAS PLACAS DE LA CUBIERTA Y LOS TERMOSTATOS INTELIGENTES ROUND TH8732 YA NO ESTÁN DISPONIBLES INSTRUCCIONES DE INSTALACIÓN APLICACIÓN Utilice el montaje de la cubierta de pared THP2400A1043 con el termostato inteligente Round.
  • Página 10: Monte La Placa De Pared

    PLACA DE LA CUBIERTA DEL TERMOSTATO INTELIGENTE ROUND PRECAUCIÓN Peligro eléctrico. Puede causar una descarga eléctrica o daños al equipo. Desconecte la energía antes de comenzar la instalación. Monte la placa de pared Monte la placa de pared directamente en la pared (Ver Fig. 2) 1.
  • Página 11 PLACA DE LA CUBIERTA DEL TERMOSTATO INTELIGENTE ROUND Monte la placa de pared en un cajetín eléctrico vertical de 2 in. x 4 in. (5,1 cm x 10,2 cm) (Ver Fig. 3) 1. Coloque el soporte en el cajetín de electricidad con la flecha hacia arriba. Inserte dos tornillos de cabeza plana n.°...
  • Página 12 © 2022 Resideo Technologies, Inc. All rights reserved. The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates. Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l’autorisation d’Honeywell International, Inc.

Tabla de contenido