Air Index - Honda GCV520 Manual Del Propietário

Replacement Parts
The emission control systems on your Honda engine were
designed, built, and certified to conform with EPA, California
(models certified for sale in California), and Canadian emission
regulations. We recommend the use of Honda Genuine parts
whenever you have maintenance done. These original-design
replacement parts are manufactured to the same standards as the
original parts, so you can be confident of their performance. The
use of replacement parts that are not of the original design and
quality may impair the effectiveness of your emission control
system.
A manufacturer of an aftermarket part assumes the responsibility
that the part will not adversely affect emission performance. The
manufacturer or rebuilder of the part must certify that use of the
part will not result in a failure of the engine to comply with
emission regulations.
Maintenance
Follow the maintenance schedule on page . Remember that this
schedule is based on the assumption that your machine will be
used for its designed purpose. Sustained high-load or high-
temperature operation, or use in unusually wet or dusty conditions,
will require more frequent service.

Air Index

(Models certified for sale in California)
An Air Index Information label is applied to engines certified to an
emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating to the engine's emission durability period.
The descriptive term indicates the useful life period for the engine's
emission control system. See your Emission Control System
Warranty for additional information.
Descriptive Term Applicable to Emissions Durability Period
Moderate 50 hours (0 80 cc, inclusive)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 80 cc, inclusive)
250 hours (greater than 80 cc)
Extended 300 hours (0 80 cc, inclusive)
500 hours (greater than 80 cc)
1,000 hours (225 cc and greater)
16
6
−
−
−
Specifications
GCV520/GXV520 (QEA-1 type)
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
[Bore × Stroke]
Net power
(in accordance with SAE J1349 )
Max. Net torque
(GCV520U)
(in accordance with SAE J1349 )
Max. Net torque
(GXV520U)
(in accordance with SAE J1349 )
Engine oil capacity
Cooling system
Ignition system
PTO shaft rotation
＊ The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
ENGLISH
458 × 427 ×
(18.0 × 16.8 ×
30.5 kg (67.2 lbs)
4-stroke, overhead camshaft, 2 cylinders (90° V-Twin)
530 cm (32.3 cu-in)
[77.0 × 57.0 mm (3.03
9.8 kW (13.3 PS, 13.1 bhp) at 3,600 rpm
＊
33.2 N·m (3.39 kgf·m, 24.5 lbf·ft)
at 2,500 rpm
＊
32.9 N·m (3.35 kgf·m, 24.3 lbf·ft)
at 2,500 rpm
＊
Without oil filter replacement:
0.90 L (0.95 US qt, 0.79 lmp qt)
With oil filter replacement:
1.00 L (1.06 US qt, 0.88 lmp qt)
Forced air
Transistor magneto
Counterclockwise
331 mm
13.0 in)
× 2.24 in)]