Battery Connections For Electric Starter; Remote Control Linkage - Honda GCV520 Manual Del Propietário

Battery Connections for Electric Starter

Recommended Battery
GCV520 12 V 30 Ah −
GXV520
GCV530 12 V 30 Ah −
GXV530
Be careful not to connect the battery in reverse polarity, as this will
short circuit the battery charging system. Always connect the
positive ( ) battery cable to the battery terminal before ＋
connecting the negative ( ) battery cable, so your tools cannot −
cause a short circuit if they touch a grounded part while tightening
the positive ( ) battery cable end. ＋
A battery can explode if you do not follow the correct
procedure, seriously injuring anyone nearby.
Keep all sparks, open flames, and smoking materials
away from the battery.
WARNING: Battery posts, terminals, and related accessories
contain lead and lead compounds.
1. Connect the battery positive ( ) cable to the starter solenoid
terminal as shown.
2. Connect the battery negative ( ) cable to an engine mounting
bolt, frame bolt, or other good engine ground connection.
3. Connect the battery positive ( ) cable to the battery positive ( )
terminal as shown.
4. Connect the battery negative ( ) cable to the battery negative
( ) terminal as shown. −
5. Coat the terminals and cable ends with grease.
BATTERY
POSITIVE ( ) CABLE ＋
BATTERY
NEGATIVE ( ) CABLE −
14
Wash hands after handling.
＋
−
＋
−
STARTER
SOLENOID

Remote Control Linkage

The throttle and choke control levers are provided with holes for
optional cable attachment.
The following illustrations show installation examples for a solid
wire cable. Do not use a braided wire cable.
Single Lever Type:
CHOKE RETURN SPRING
INSTALLATION:
Install with the short
end hook toward the
control base side.
CONTROL LEVER
Dual Lever Type:
CHOKE RETURN SPRING
＋
INSTALLATION:
Install with the short
end hook toward the
control base side.
CHOKE LEVER
ENGLISH
THROTTLE/CHOKE
CABLE (SOLID WIRE)
5 × 16 mm SCREW
CABLE HOLDER
STOPPER RUBBER
INSTALLATION:
To install the stopper
rubber, first align the boss
with the hole of the
control lever bracket, then
turn the rubber 90° and
secure it to the bracket as
shown.
LEVER SPRING
THROTTLE CABLE
(SOLID WIRE)
5 × 16 mm SCREW (2)
CABLE HOLDER (2)
CHOKE CABLE
(SOLID WIRE)
THROTTLE LEVER