Idiomas disponibles
Idiomas disponibles
TRIGGER
SWITCH (Fig. 3)
To turn the impact driver ON,
depress
the trigger switch.
To turn it OFF, release the
trigger switch.
VARIABLE
SPEED (Fig. 3)
The variable-speed
trigger
switch delivers
higher speed
with increased trigger pressure
and lower speed with decreased
trigger pressure.
DIRECTION=OF-
ROTATION SELECTOR
(FORWARD/CENTER-
LOCK/
REVERSE) (Fig. 4}
The direction of bit rotation is
reversible and is controlled by
a selector located above the
trigger switch.
With the impact driver held in
normal operating position, as
shown in Fig. 4:
1.
Fig. 3
Variable-Speed
l
-T-
1
Trigger Switch
r
I
I
I
Fig. 4
•
% I
]
I
_
Direction-of-
Rotation
Selector
Position the direction-of-rotation
selector to the left of the tool for
forward
rotation.
2.
Position the direction-of-rotation
selector to the right of the tool for reverse.
3.
Setting the switch
in the OFF (center-lock)
position
helps reduce the
possibility
of accidental
starting when not in use.
NOTICE: To prevent gear damage, always allow the impact driver to come to a
complete
stop before changing
the direction
of rotation.
NOTICE: The impact driver will not run unless the direction-of-rotation
selector
is engaged
fully to the left or right.
ELECTRIC
BRAKE
To stop the impact driver, release the trigger switch and allow the tool to come
to a complete
stop. The electric
brake quickly stops the coupler from rotating.
This feature engages automatically
when you release the trigger switch.
12
