Idiomas disponibles
Idiomas disponibles
16. USB type-C plug*
17. USB cable*
18. USB type-A plug*
19. Power connector
20. USB type-C connector*
21. On/off switch
22. Air pressure outlet connector
23. Clamping lever
24. LED indication ring
25. Car preset button
26. SUV preset button
27. Display
28. Measuring unit indicator
29. Unit change button
30. Increase target pressure button
31. Reduce target pressure button
32. Start/stop button
* USB Type-C® and USB-C® are trademarks of USB
Implementers Forum.
3. OPERATION
First use (Fig. A)
Do not cover the vents.
Do not operate the device in dusty
environments. Doing so poses a fire hazard
and could damage the device.
Place the product on a level, non-flammable
surface. Depending on the inflatable you can use
the connection valve (14) directly or along with one
of the included valve adapters (5-10).
For inflatables with counterpressure (e.g. partly
filled car tyre): Switch on the product before
connecting the connection valve (14) to the tyre.
This product is not suitable for continuous operation.
It was developed to produce air pressure, not air
volume. Do not use the product for longer than 10
minutes without interruption to prevent overheating
and damage to the device. Afterwards allow to cool
for a minimum of 10 minutes.
Charging the machine (Fig. B, C)
The machine must be charged before first
use.
WWW.VONROC.COM
• Plug the USB type-C plug (16) into the USB
type-C connector (20) on the machine.
• Plug the USB type-A plug (18) into an power
adapter (not included) or device (e.g. computer,
powerbank) with suitable female USB connector.
Please note that the device should be able to
deliver constant 5V 2A power.
• The Battery LED indicator (4) will lighten up and
show the charging status.
Checking the battery charging status (Fig. A)
• The Battery LED indicator (4) indicates the
battery charge status.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more charge
the battery has left.
• When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
Connecting to a cigarette lighter socket (Fig. A, B, C)
Verify the socket of the cigarette lighter in
your vehicle has an adequately sized fuse.
Alternatively to using the integrated li-ion battery,
the machine can also be powered from a 12V
cigarette lighter socket. This could come in handy,
for example, if the battery is empty, but there is no
possibility to recharge.
• Plug the power plug (13) into the power connec-
tor (19) on the machine.
• Plug the cigarette lighter plug (11) into the
socket of the 12V cigarette lighter. If you are
unsure how to perform this, please consult the
manual of the vehicle.
When using 12V cigarette lighter socket as
power source, please start vehicle to
protect vehicle battery.
Connecting the valve without valve adapter
(Fig. A, B, C, D, F, G)
Use a calibrated pressure gauge (e.g. at a
petrol station) to check the required tire
pressure. It is imperative to read the
information in the vehicle's owner manual
concerning the inflation of tires.
EN
9
