Recovery Unit; Recycling - S&P UTBS Serie Manual De Instalación. Instrucciones De Uso

9.9.RECOVERY UNIT

To remove the heat exchanger open the inspection door and pull it out.

10. RECYCLING

In accordance with EEC Standards and our responsibility for future generations, we are
obliged to recycle all the materials we can. Therefore, please deposit all waste material
and packaging in their corresponding recycling containers and hand in the replaced units
to the nearest handler of this type of waste product.
WARNING!!! Support the heat exchanger with
your hand while performing this step to pre-
vent it from falling due to its own weight (there
is a risk of damage to the heat exchanger and
a risk of accident to the technician performing
the operation).
To remove the heat exchanger from its loca-
tion, slide it along its guides, pulling at the
corners and not on the fins, in order to pre-
vent damage.
Clean the heat exchanger using compressed
air or a vacuum cleaner and wash it using
mild detergent. It is recommended that perio-
dic maintenance be performed once per sea-
son of operation.
73