Tdp-S Model - S&P UTBS Serie Manual De Instalación. Instrucciones De Uso

CONSTANT PRESSURE CONTROL
Leave one of the pressure taps
unconnected.
Important: the upper pressure tube must be connected to the "+" terminal and the lower
one to the "-" terminal. Failing this, the pressure measured will be out of range and the
transmitter screen will flash.

6.7.2.2.1 TDP-S MODEL

CONSTANT AIRFLOW CONTROL
Connect the two taps and enter the value K shown in the
table above into the pressure transducer.
Pressure
Connection
57
Air
direction