Idiomas disponibles
Idiomas disponibles
an uncontrolled and unintended liquid
distribution. Use a suitable aid to reach
higher places.
Do not attempt to remove congestion
by blowing into parts of the product
with your mouth.
Do not connect the product to another
pressure source e. g. an air compressor.
Secure the product against falling,
overturn, vibration, extremely high or
low temperatures, direct sunlight and
impacts during transportation to avoid
damages and spillage.
Do not leave the product in direct
sunlight. Ensure that the device is not
heated beyond the maximum operating
temperature. Protect the product from
frost and ammonia. Observe the storage
instructions within this instruction
manual.
Do not attempt to repair or modify the
product in any way. Clean and maintain
the product as described within this in-
struction manual. Only use spare parts
and accessories recommended by the
manufacturer. Repairs shall only be car-
ried out by the manufacturer, its service
agent, or similarly qualified persons.
Failure to do so may result in a hazard.
Observe the legal requirements of your
country for accident prevention and
have the product examined externally
by a competent professional every 2
years and subject it to an internal in-
spection every 5 years.
PARTS OF THE PRESSURE SPRAYER
1.
Shoulder harness
2.
Base
3.
Nozzle
4.
Spray lance
4a. Spray lance nut
4b. Spray lance cone
4c. Spray lance O-ring
5.
Shoulder harness eyelet (on both
sides)
6.
Safety valve
7.
Pressure valve
7a. Pressure valve nut
8.
Trigger unit
8a. Trigger unit O-ring
9.
Handle
10. Hose
11.
Spray lance holder (on both sides)
12. Filler funnel
13. Suction hose terminal
14. Liquid level indicator
15. Spray tank
16. Pump unit
16a. Pump handle lock
16b. Pump handle hook (on both
sides)
16c. Pump handle
PARTS IN THE BOX
1 x Preassembled sprayer
1 x Preassembled spray lance (4)
1 x Preassembled pressure valve (7)
60
