Idiomas disponibles
Idiomas disponibles
Pressure sprayer
INTRODUCTION
To get the most out of your new product, please read this manual before use.
Please also save the manual in case you need to refer to it at a later date.
TECHNICAL DATA
Model no.
Spray tank dimensions
Ø180 x 335 mm
Gross mass (empty)
Gross mass (full)
Spray lance length
Nominal volume
Total residual volume
Maximum working pressure
2,5 bar ≈ 32 strokes
Minimum working pressure
1,5 bar ≈ 20 strokes
Pressure valve operational range
1,5±0,2 bar / (opened)
1,0±0,2 bar / (closed)
Volume flow (max.)
Volume flow (average)
Operating temperature range 0 – 40 °C
SPECIAL SAFETY INSTRUCTIONS
Only trained, healthy and rested opera-
tors may work with the product. Do not
use the product when tired, ill or under
the influence of alcohol, drugs, or med-
ication. Ensure inexperienced users
receive proper training before use.
Keep the product out of the reach of
children.
The product must be fully assembled
before use. Do not use the partially
assembled product with damaged parts
or removed safety devices.
Take precautions when filling, mixing,
discharging or disposing liquids from
95678
the product to avoid spillage and envi-
ronmental contaminations. Dispose of
any residual liquids according to local
laws and regulations.
1,46 kg
Wear suitable personal protective
7,96 kg
equipment (PPE) such as clothing,
gloves, suitable shoes, goggles, and
430 mm
respiratory protection when working
5 litres
with hazardous substances. Observe the
instructions from the sprayed medium
28 ml
manufacturer.
Clean all parts of the product thorough-
ly before switching from one liquid to
another.
Do not eat, drink, or smoke while work-
ing with the product.
Clean your hands, face, and especially
unprotected body parts after use.
0,28 l/min
When pumping, always ensure that
the recommended spraying pressure is
0,27 l/min
maintained. Too much pressure may
result in an explosion.
Never spray on people, animals, electri-
cal devices, and lines, into the wind, or
bodies of water.
Keep bystanders away during spraying.
Take precautions to prevent hazardous
substances from being misused.
Always direct the nozzle away from you
when changing accessories, during
assembly, disassembly, or during ad-
justments.
Direct the lance always downwind from
the operating position. The spray jet
may be subjected to winds resulting in
59
GB
