Idiomas disponibles
Idiomas disponibles
DIRECTIONS
HANDLING AND
TRANSPORT
INSTALLATION
ENGLISH
Cabinet with incorporated plug (Max 16 A) for the connection with an electric
l
system complying with the rules which has been carried out or inspected by skilled
technical staff.
Unplug the cabinet before executing cleaning or service operations.
l
Repairs and lights replacement must be carried out by skilled technical staff.
l
Make sure children do not play with the cabinet.
l
Do not touch the working cabinet barefoot or with wet hands
l
This cabinet has been projected for the storage, the display and the sale of frozen
l
foods and ice cream in special bins only: the manufacturer refuses all responsability
resulting from a misusage of the cabinet (eg.: cooling drinks in corked containers,
deep-frozing foods, etc.).
The cabinet contains oil, cooling gas, polyurethane foam, plastic and metallic
l
components and glass. The demolition of the cabinet and the recovery of the
component materials must be carried out according to the regulations in force in
this matter.
Do not wet the cabinet with water or other liquids jets. You may risk to damage
l
the electrical equipement.
The cabinet shall not be used exposed to the rain.
l
The cabinet is not suitable for working in dangerous environment with risk of fire,
l
explosion or radiation.
Store food at temperatures set by food safety regulations to avoid personal hazards and
l
food waste.
The optimal storage temperature depends on the food type, refer to current regulations
l
that prescribe the maximum permitted temperatures for product category; generally, a
set point of -18°C is recommended for gelato storage.
The crated cabinet has a wooden board suitable for lifting by fork lifts or transpallets
l
(Picture 5).
The cabinet is equipped with pivoting wheels.
l
Unpack the cabinet
l
The packing stuff (plastic bags, nails, screws, polystyrene, etc.) must not be kept
l
within children's reach because it could be dangerous.
Remove the board removing the 2 screws A which fix it to the cabinet (Picture 7)
l
Clean the cabinet (inside/outside) with a warm water using a no-abrasive sponge
l
and dry it with a soft cloth.
Make sure:
l
- the socket is suitable for the plug, has an efficient earthed line, is protected by
a differential magnetothermic switch and has a suitable reach. (16 A).
- voltage and frequency of the electric power are according to the data related on
the identification rating plate placed od the side of the cabinet. (Picture 10).
The cabinet's earthing is compulsory according to the law.
The manufacturer refuses all responsability for failing observance of this
specification.
Thecabinet has to be flat located, far from heat sources (heating plants, stoves,
l
sun) in order to obtain the best performances (Picture 6).
If the cabinet is equipped with scooper holder (OPTIONAL), assemble it as shown
l
