Idiomas disponibles
Idiomas disponibles
GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective shoes
Wear protective clothing
Read instruction manual
Class I construction (protective earth)
Caution!
Risk of explosion!
Indoors use only!
T-130˚
Conforms to relevant legislation and safety standards.
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Specification
Input Power: .................................................. 230V~ 50Hz, 570W
Output Power 12V: ......................................... effective 9.5A (RMS),
Output Power 12V (boost): ............................. effective 13A (RMS),
Output Power 24V: ......................................... effective 13A (RMS),
Output Power 24V (boost): ............................. effective 17A (RMS),
Battery Capacity Range: ................................ 20 - 240Ah (12 & 24V)
Battery Cell Type: ........................................... standard (wet cell)
DC Circuit Protection: ..................................... 1 x 12V 15A fuse
AC Circuit Protection: ..................................... 1 x 250V 3A fuse
Thermal Protection: ....................................... Self-resetting
Protection Class: ............................................
Ingress Protection: ......................................... IP20
Product Weight: ............................................. 6.84kg
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
4
average 5.7A (EN 60335)
average 7.8A (EN 60335)
average 7.8A (EN 60335)
average 10.2A (EN 60335)
thermal cut out
Original Instructions
V
Volts
~
Alternating current
A
Ampere
n
No load speed
o
Hz
Hertz
W, kW
Watt, kilowatt
/min or min
-1
(revolutions or reciprocation) per minute
General Safety
WARNING Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
WARNING: This device is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless
they have been given supervision or instruction concerning use of the device by a
person responsible for their safety. Children must be supervised to ensure that they do
not play with the device.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
Work Area Safety
a) Do not operate electrical devices in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Electrical devices create sparks
which may ignite the dust or fumes.
Electrical Safety
a) Electrical plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) devices. Unmodified plugs
and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet conditions. Do
not submerge non-pressure-rated devices in water. Water entering an electrical
device will increase the risk of electric shock.
d) Do not abuse the power lead. Never use the lead for carrying, pulling or
unplugging the device. Keep lead away from heat, oil, sharp edges or moving
parts. Damaged or entangled power leads increase the risk of electric shock.
e) If operating an electrical device in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD reduces the risk
of electric shock.
WARNING: When used in Australia or New Zealand, it is recommended that devices
are ALWAYS supplied via Residual Current Device (RCD) with a rated residual current
of 30mA or less.
Personal Safety
a) Stay alert, watch what you are doing and use common sense when operating
an electrical device. Do not use potentially dangerous electrical devices while
you are tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating potentially dangerous devices may result in serious
personal injury.
b) Use personal protective equipment including eye protection where appropriate.
Protective equipment used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to a power source. Carrying electrical devices with your finger on the
switch or energising devices that have the switch on invites accidents.
d) Do not overreach. Keep proper footing and balance at all times. This enables
better control of the device in unexpected situations.
Use and Care
a) Do not force the device. Use the correct device for your application. The correct
device will do the job better and safer at the rate for which it was designed.
b) Do not use the electrical device if the switch does not turn it on and off. Any
device that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the power source before making any adjustments, changing
accessories, or storing electrical devices. Such preventive safety measures
reduce the risk of starting the device accidentally.
d) Store idle devices out of the reach of children and do not allow persons
unfamiliar with the device or these instructions to operate it. Electrical devices
may be dangerous in the hands of untrained users.
e) Maintain electrical devices. Check for defects of parts and any other condition
that may affect the device's operation. If damaged, have the device repaired
before use. Many accidents are caused by poorly maintained electrical devices.
f) Use the device and its accessories in accordance with these instructions,
taking into account the conditions and the task to be performed. Use of the
device for operations different from those intended could result in a hazardous
situation.
