Idiomas disponibles
Idiomas disponibles
Set the drinking cup into the slot then add water.
8.
Transfer photos/videos to computer
To connect the feeder camera to your computer, open the silicone hatch on the back
of the product to access the USB port. Connect the provided cable to the camera's
USB port, then directly to a primary USB port on your computer.
Once connected and turned on, the feeder camera screen will turn on.
To download your photos/videos to a computer, turn the switch to the ON position.
The computer will recognize the device as a "removable disk" (USB drive). In the
removable disk, you will find the photo and video files in and you can copy them to
your computer.
CAUTION: Do not disconnect the USB cable or remove the memory card while copying
photos/videos. You risk losing files.
9.
Technical specifications
IR light
PIR sensing distance
Lens
Screen
Image sensor
Photo resolution
Burst
Resolution video
Memory
Battery
Protection rating
Dimensions
Weight
Guide d'utilisation – user guide 1074 – Janv 2024 - 22/59
b.
Setting up the drinking cup
Infrared flash range: 940 nm
About 2 meters
120°
Colour screen 1.44 IPS
1.3 Mega Pixels Couleur CMOS
12 MP | 8 MP | 5 MP | 3 MP
Programmable 3 to 10 photos per trigger
FULL HD 1080p | HD 720p |480p
Micro SD card of 32 GB maximum (class 10
minimum) not included
5V/2A
IP65
170 x 100 x 110 mm
340 g
