Idiomas disponibles
Idiomas disponibles
3.
Charging the bird feeder camera
- The product comes with a solar panel that will continuously charge it.
- If there is no sunlight for a long time and the solar panel cannot meet the feeder
camera charging. Then need you to take the product to home to charge it.
Remove the silicone shell on the port and charge the camera with the USB cable.
Please use 5V-2A to charge the product.
4.
Inserting the microSD card (max 32 GB) before powering on
The camera does not have internal memory. It is necessary to install a memory card for
the device to work (micro-SD card with a capacity of 32 GB maximum – class 10
minimum). You can obtain micro-SD cards with adapter at any time on the website
www.numaxes.com.
- Open the protective silicone flap to access the memory card slot.
- Insert the memory card. Make sure the metal contacts are inserted first.
- Push the memory card in until you hear an audible click. The memory card can
only be inserted in one direction. Do not force the card to be inserted if it does
not fit properly.
- Close the silicone protection flap.
- To remove the memory card, simply push and the card will eject.
5.
How the Bird Feeder Camera Works
a.
Power ON / OFF
To turn the device on, place the selector in the ON position. Press the MODE button
to turn on the screen. Slide the switch to the OFF position to turn off the device. OFF
mode is the "safety" mode, allowing you to replace the memory card.
Guide d'utilisation – user guide 1074 – Janv 2024 - 17/59
NOTE: Only when the
microSD card is inserted
into the device can the
product operate
normally. If the microSD
card is not inserted, the
corresponding functions
cannot be used.
