Idiomas disponibles
Idiomas disponibles
Occasionally,
a minor problem
may arrise0 and a service call may not be necessary- use this troubleshooting
guide for a possible solution.
If the unit continues to operate
improperly,
call Sears at 1-800-4MY-HOME.
PROBLEM
POSSIBLE CAUSE
1) Unit does not work.
2) Refrigerator
running too
frequently.
3) Internal
Temperature
too
cold.
4) Internal
Temperature
not
cold enough.
5) Freezer not cold enough.
6) Light wlil
not work.
_"No power to unit.
_"Power cord is unplugged.
_"Wrong
voltage
is being used.
_"Temperature
control too high.
_"Door not closed.
_"Hot food inserted.
_"Doors open too long/often.
_"Close proximity
to heat source or
direct sunlight.
I. Temperature
control
too
high.
_"No power to unit.
_"Power cord is unplugged.
_"Wrong
voltage
is being used.
I" Temperature
control too low.
l" Hot food inserted.
I. Doors open too long/often.
I. Air flow obstruction.
I. Close proximity
to heat source or
direct sunlight.
_"Temperature
control too low.
_"Door not closed.
i. Hot food inserted.
I. Doors open too long/often.
I. Wrong
voltage
is being used.
_"No power to unit.
_"Power cord is unplugged.
_"Bulb is loose/needs
replacing.
_"Door switch is stuck.
SOLUTION
" Check connection of power cord at
oower
source.
" Plug in unit.
" Use proper voltage.
" Check/adjust
settings as needed.
" Close the door securely.
" Cool food before
inserting.
" Minimize door openings/duration.
" DO NOT place unit close to heat sources
or in direct sunlight.
" Check/adjust
settings as needed.
" Check connection of power cord at
oower
source.
" Plug in unit.
" Use proper voltage.
" Check/adjust
settings as needed.
" Cool food before
inserting.
" Minimize door openings/duration.
" Allow room for air to circulate around the
unit.
" DO NOT place unit close to heat sources
or in direct sunlight.
" Check/adjust
settings as needed.
" Close door securely.
" Cool food before
insterting.
" Minimize door openings/duration.
" Use proper voltage.
• Check connection of power cord to
)ower
source.
• Plug in unit.
• Tighten or replace
bulb.
• Check the switch for obstructions, clean
if necessary.
8
