Craftsman 286.17589 Manual Del Operador página 21

Idiomas disponibles

Idiomas disponibles

PROBLEM
CAUSE
SOLUTION
An unusually
1, Damaged teeth
1. Replaceblades
large amount
2. Cuttingspeed is tooslow
2, Increase cuttingspeed
of s parks
3, Bluntteeth
3. Replaceblades
A lot of wear
1. Cutting speed is too fast
I Reduce cuttingspeed
In sections
2. Damaged teeth
2, Replace blades
3. Bluntteeth
3, Replace blades
4. Not cuttingperpendicular
4. Hold saw perpendicular
to work surface
to work surface
Blades are
1. Damaged teeth
1. Replace blades
breaking
2. Cutting speed is too fast
2. Reduce cuttingspeed
3. Bluntteeth
3. Replace blades
4. Blades have buckled
4. Replace blades
5. Blades have burned out
5. Replace blades
Possible causes
of broken teeth
1. Cuttingspeed istoo fast
2. The surfacebeing
cut istoo hard
3. Theteeth havebeen
damaged by impact
4. Bladeswerenot
installed properly
5. Bladesare burnedout
6. Notcuttingperpendicular
to worksurface
1. Reduce cutting speed
2. Replace blades
3, Replace blades
4, Replace bladesand follow
the proper blade installation
instructions
5. Replace blades
6, Replace bladesand ahvays
holdsaw perpendicular to
work surfacewhen cutting
IMPORTANT: if a noticeable rise in temperature occurs in the motorhousing and the
saw becomes uncomfortableto hold, turn the saw off, and allow it to cool downto
roomtemperature and check the blade for wear before resumingyour cuttingproject.
If this is not done, permanent damage to the saw will result.
Make sure that the material being cut is within the specificationof the saw'scapacity.
Review the cutting speed that you are applyingto the work piece.
Z_WARNING:
ThisTwin
Cutter saw uses specially designed
5-in. blades
I
and no other types of blades should ever be used. Other blades will not operate
I
safely in this saw and could result in serious personal injury.
The following accessoriesfor your Twin Cutter saw are available at your local
Sears store.
9-32566 -- A packaged set of 2 UniversalTwln Cutter Saw Blades
9-26678 -- 6 Packaged Wax Lubricating Sticks
/_ WARNING:
The use of attachments or accessoriesthat are not
recommended might be dangerous.
21
I
loading