Idiomas disponibles
Idiomas disponibles
REMOVING BLADES FROM SAW (SeeFigs,12- 16)
1.Unplug t hesawand
allow blades to cool.
/'lk WARNING:
Failure to unplug the saw Couldresult in accidental starting I
causing possible serious personal injury,
I
2, Rotate the blades until the holes in both blades are aligned. Then place pin
attached to the wrench through holes in blades. Unscrew Lock Nut
counterclockwise and remove (see Fig. 12),
3. Open the retractable guard (see Fig. 13).
4. Lift up and remove Blade "B" (see Fig. 14),
5. Remove the arbor adapter (see Fig. 15).
6. Lift up and remove Blade "A" (see Fig, 16).
Fig. 13
Retracted
Fig. 15
rbor
Adapter
Fig. 16
17
